In this guide, I've shared the best tactics and solution settings for those who have problems such as freezing, low fps, fps drop, stuttering while playing Devil May Cry 5.
MINIMUM SYSTEM REQUIREMENTS
Requires a 64-bit processor and operating system
OS: 64-bit Windows 7, Windows 8.1, Windows 10
Processor: Intel® Core™ i5-4460, AMD FX™-6300, or better
Memory: 8 GB RAM
Graphics: NVIDIA® GeForce® GTX 760 or AMD Radeon™ R7 260x with 2GB Video RAM, or better
DirectX: Version 11
Storage: 35 GB available space
RECOMMENDED SYSTEM REQUIREMENTS
Requires a 64-bit processor and operating system
OS: 64-bit Windows 7, Windows 8.1, Windows 10
Processor: Intel® Core™ i7-3770, AMD FX™-9590, or better
Memory: 8 GB RAM
Graphics: NVIDIA® GeForce® GTX 1060 with 6GB VRAM, AMD Radeon™ RX 480 with 8GB VRAM, or better
DirectX: Version 11
Storage: 35 GB available space
1) Best Graphics Settings for DMC 5
These graphics settings are for low-end computers.
If you have a good pc or laptop, you can increase the settings slightly.
Go to in-game Options > PC Options > Graphics
Rendering Method: Normal
Resolution Scaling: 100%
Texture Quality: Medium or lower
Texture Filtering Quality: Minimum
Mesh Quality: Low
Anti-aliasing: TAA
Motion Blur: OFF (it does not matter)
Effects Quality: Low
Shadow Quality: Minimum
Shadow Cache: ON
Ambient Occlusion Type: OFF
Bloom: OFF
Lens Flare: OFF
Volumetric Light Quality: None
Screen Space Reflections: OFF
Subsurface Scattering: OFF
Chromatic Aberration: OFF
2) Steam Launch Options
- Go to the list of games in the Steam library.
- Right-click the Devil May Cry 5 and click the Properties.
- Click the Set Launch Options in the General tab.
- Type the following commands into the space in the incoming window.
-high -USEALLAVAILABLECORES
3) Update Your Graphics Drivers
You should keep your computer’s graphics drivers updated.
Those with Nvidia video cards can download and install the latest video card drivers here.
Those with AMD video cards can download and install the latest video card drivers here.
4) NVIDIA Control Panel Settings
- Open NVIDIA Control Panel
- Go to the Adjust image settings with preview tab.
- Click the “Use my preference emphasising“ (If you have a good pc, Let the 3D application decide)
- Put the bar in Performance mode.
- Apply
- Click the Manage 3D settings
- Click the Program Settings
- Click the Add
- Select the Devil May Cry 5 (DevilMayCry5.exe) from the list
- After, make the following settings
Power management mode: Prefer maximum performance - Apply
5) AMD Radeon Settings
- Open the AMD Radeon Settings window.
- Click on the Gaming tab.
- Then click on Global Settings.
- Go to the Anti-aliasing mode, choose Override application settings.
- Click on the Anti-aliasing level, so make sure you are selected the 2X
- Go to the Anisotropic Filtering Mode and turn it on.
- Then, click on the Anisotropic Filtering Level, so make sure you are selected the 2X.
- Click on the Texture Filtering Quality and select the Performance.
- Now, click on the Wait for Vertical Refresh and select the Always off.
- Click on the Tessellation Mode and select the Override application settings.
- Finally, click on the Maximum Tessellation Level and select the 32x or lower.
6) Power Options
If the CPU cooler is not enough, you can skip this setting. Processor temperature may increase by 5-6 degrees.
- Right-click the Windows icon on the bottom left.
- Click the Power Options
- Click the Additional power settings to the right of the window that opens.
- Select the High performance on the Preferred plans tab.
- After, click on the Change plan settings link to the right of the High performance.
- Tap on the Change advanced power settings
- Find Processor power management in the incoming list, click the + icon to its left.
- Set Minimum processor state and Maximum processor state to 100%
- Click on the OK
7) Full-screen Optimisations
- Go to the folder where the game is installed.
Example > E:\SteamLibrary\steamapps\common\Devil May Cry 5 - Right-click the DevilMayCry5.exe application
- Tap the Properties
- Tick Disable full-screen optimisations on the Compatibility tab.
- Click on the OK
8) Game Mode
- To turn off Windows 10 game mode, click the Start icon to bring up the Start menu and open Settings.
- Click the Gaming
- On the Game Bar tab, set the “Record game clips, screenshots and broadcast using Game bar” option here to Off.
- On the Captures tab, set the “Record in the background while I’m playing a game” option here to Off.
- On the Game Mode tab, set the “Game Mode” option here to Off.
9) Windows Performance Options
- Type performance in the search section of Windows, click to Adjust the appearance and performance of Windows from the results.
- Select the Adjust for best performance from the options in the Performance Options window that opens.
- Click OK
10) Cleaning Temporary Files
- Simultaneously press the Windows logo and R keys.
- Type %temp%
- Press Enter key.
- Delete everything in the Temp folder that opens. You can skip undeleted.
- Again, Simultaneously press the Windows logo and R keys.
- Type temp
- Press Enter key.
- Delete everything in the folder that opens.
- Again, Simultaneously press the Windows logo and R keys.
- Type prefetch
- Press Enter key.
- Delete everything in the Prefetch folder that opens.
Finally, empty the Recycle Bin
11) SSD
If you have an SSD, I recommend that you install the game on the SSD or move the game files to the SSD.