Home » Nostos – How to Increase FPS & Performance
Nostos

Nostos – How to Increase FPS & Performance

Nostos – How to Increase FPS & Performance

Nostos is an open world multiplayer RPG game for PC & VR. There are too many optimization issues in Nostos. I observe very huge drops of FPS during fights. The game is under development, hopefully they will fix these problems soon.

Anyway, if you are experiencing performance issues in Nostos, I recommend you that check out the following tips. In this guide, I listed a few tweaks to fix the performance issues in Nostos, such as stuttering, fps dropspikeslow fpsfreezinglagging.

There are 17 ways to improve your performance in Nostos.

System Requirements for Running Nostos

Minimum System RequirementsRecommended System Requirements
CPUIntel Core i5 4590 or AMD FX-8350Intel Core i7-6700K or AMD Ryzen 5 1600X
GPUNvidia GeForce GTX 1060 / AMD RX 480Nvidia GeForce GTX 1080 / AMD RX Vega 64
DirectXDirectX 11DirectX 11
RAM8 GB RAM16 GB RAM
Storage15 GB available space15 GB available space
OSWindows 7/8.1/10 64-bitWindows 7/8.1/10 64-bit

1) Best Graphics Settings for Nostos

In the graphics setting, the only way to gain extra performance is to lower the graphics quality. I suggest that you should set Graphics Quality to Low. I’ll update this section if developers add more graphics options in the future.


2) Steam Launch Options

  • Go to the list of games in the Steam library.
  • Right-click the Nostos and click the Properties.
  • Click the Set Launch Options in the General tab.
  • Type or paste the following commands into the box in the incoming window.

-USEALLAVAILABLECORES -high


3) Update Your Graphics Drivers

You should keep your computer’s graphics drivers updated.

People who have an NVIDIA graphics card can download and install their new drivers here.

People who have an AMD graphics card can download and install their new drivers here.


4) NVIDIA Control Panel Settings

  • Open NVIDIA Control Panel
  • Go to the Adjust image settings with preview tab.
  • Click the “Use my preference emphasizing“ (If you have a mid&high end pc, Let the 3D application decide)
  • Put the bar in Performance mode.
  • Apply
  • Click the Manage 3D settings
  • Click the Program Settings
  • Click the Add
  • Select the Nostos from the list, then click on the “Add Selected Program” button.
  • After, make the following settings
    Power management mode: Prefer maximum performance
  • If you have a notebook, make sure you have selected the “High-performance NVIDIA processor” on preferred graphics processor.
nvidia
  • Apply and close the NVIDIA Control Panel.

Effect of the “Power management mode” setting differs between GPUs. If these settings made your FPS worse, just set the “Power management mode” to “Optimal power“. After that, it will increase. You can test it.


5) AMD Radeon Settings

  • Open the AMD Radeon Settings window.
  • Click on the Gaming tab.
  • Then click on Global Settings.
  • Go to the Anti-aliasing mode, choose Override application settings.
  • Click on the Anti-aliasing level, so make sure you have selected the 2X
  • Go to the Anisotropic Filtering Mode and turn it on.
  • Then, click on the Anisotropic Filtering Level, so make sure you have selected the 2X.
  • Click on the Texture Filtering Quality and select the Performance.
  • Now, click on the Wait for Vertical Refresh and select the Always off.
  • Click on the Tessellation Mode and select the Override application settings.
  • Finally, click on the Maximum Tessellation Level and select the 32x or lower.
pubg amd settings

6) Intelligent Standby List Cleaner

The “Intelligent standby list cleaner” application will monitor and clear the memory standby list when it is > 1000mb (1gb). It will help players to fix stutters in games.

  • Download the Intelligent standby list cleaner
  • Run the 7-zip file.
  • Extract to a folder.
  • Go to the that folder.
  • Run the “Intelligent standby list cleaner ISLC” application.
  • Check the “Start ISLC minimized and auto-Start monitoring”
  • Also, check the “Launch ISLC on user logon”
  • Now, click on the Start button
  • Minimize
Intelligent Standby List Cleaner

7) Full-screen Optimizations & High DPI in Windows 10

full-screen optimisations
  • Go to the folder where the game is installed.
    (Steam Library > Right-click on Nostos > Properties > LOCAL FILES > BROWSE LOCAL FILES)
  • Right-click on exe of Nostos
  • Hit the Properties
  • Tick “Disable full-screen optimizations” on the Compatibility tab.
  • After that, click on the “Change high DPI settings” button.
  • Under the “High DPI scaling override” section, tick the “Override high DPI scaling behavior
  • Use the “Scaling performed by:” drop-down menu and select the “Application”
  • Click on the OK and again OK.
High DPI

8) Power Options

If the CPU cooler is not enough, you can skip this setting. Processor temperature may increase by 5-6 degrees.

power plan
  • Right-click the Windows icon on the bottom left.
  • Click the Power Options
  • Click the Additional power settings
  • Select the High performance on the Preferred plans tab.
  • After, click the Change plan settings link next to High performance.
  • Tap on the Change advanced power settings
  • Find Processor power management in the incoming list, click the + icon on the left side.
  • Set Minimum processor state and Maximum processor state to 100%
  • Click on the OK

9) Game Mode

  • To turn off Windows 10 game mode, click the Start icon to bring up the Start menu. Then open the Settings.
  • Click the Gaming
  • On the Game Bar tab, set the “Record game clips, screenshots and broadcast using Game bar” to Off.
  • On the Captures tab, set the “Record in the background while I’m playing a game” to Off.
  • On the Game Mode tab, set the “Game Mode” to Off.

If you are using an older version of Windows 10, you may not see the Game Mode settings. In this case, you can configure the settings directly in the Registry.

  • Press the Windows logo key and R key simultaneously on your keyboard.
  • Type regedit
  • Press the Enter key.
  • The Registry Editor will open. In the left panel, Navigate to HKEY_CURRENT_USER\Software\Microsoft\GameBar
  • Right-click inside the panel and select New
  • Click on the DWORD (32-bit) Value
registry new
  • Rename the New Key to AllowAutoGameMode
  • Right-click on the AllowAutoGameMode
  • Select the Modify…
  • Set the “Value data” to 0
auto game mode
  • Click on the OK button.
  • Close the Registry Editor.
  • Restart your PC.

10) Windows Performance Options

  • Type performance in the search section of Windows, click to Adjust the appearance and performance of Windows from the results.
  • Select the Adjust for best performance from the options in the Performance Options window that opens.
  • Click OK
performance

11) Cleaning Temporary Files

  • Simultaneously press the Windows logo and R keys.
  • Type %temp%
  • Press Enter key.
  • Delete everything in the Temp folder that opens. You can skip undeleted.
  • Again, Simultaneously press the Windows logo and R keys.
  • Type temp
  • Press Enter key.
  • Delete everything in the folder that opens.
  • Again, Simultaneously press the Windows logo and R keys.
  • Type prefetch
  • Press Enter key.
  • Delete everything in the Prefetch folder that opens.

Finally, empty the Recycle Bin


12) SSD

If you have a Solid-State Drive, I recommend that you install the game on the SSD or move the game files to the SSD.


13) Optimize Your Discord

If you are using Discord, disable the Hardware Acceleration and in-game overlay.

  • Open Discord
  • Go to the User Settings
  • Then, go to the Appearance tab.
  • Uncheck the Hardware Acceleration.
Optimize Discord
  • Go to the Overlay on App Settings tab.
  • Make sure unchecked the “Enable in-game overlay”
discord overlay

14) Optimize Your Google Chrome

If you’re using Google Chrome, you’ll need to make this setting.

chrome setting
  • Go to settings page in Chrome
  • Click the Advanced
  • Go to the System tab
  • Finally, uncheck the “Continue running background apps when Google Chrome is closed”

15) Background Processes

You should close all unnecessary applications, such as Chrome, Spotify, OneDrive. Also, if the Discord is idle, you should quit Discord.

Also, you can use the CCleaner to go through your startup and scheduled tasks, and disable everything that you consider unnecessary.

And also, you should disable your Firewall/Antivirus while playing Nostos, such as Eset, Avast, BitDefender, AVG, Acronis Active Protection etc. Or add your Nostos directory in the exceptions list in your antivirus software.


16) Increase The Priority

You need to adjust this setting every time you enter the game.

  • Launch the game.
  • Simultaneously press the ALT and TAB keys to minimize the game.
  • Open the Task Manager
  • Click on Details Tab
  • In the list, find the exe of Nostos
  • Right-click on exe application and Set priority to High.

If you facing stuttering issue in the game after doing this, don’t do the High priority setting. Set it to Normal.


17) CPU Limiter – Fix Freezing & Stuttering

If the CPU usage is around 100% while playing Nostos and you experience freezing/stuttering issues, you can limit your CPU. Also, if you apply this setting, you can skip the previous method.

  • Download and install the Process Lasso
  • Run the Process Lasso application.
  • Launch the Nostos.
  • Go to the Process Lasso app and find the exe of Nostos in “All processes” list.
  • Right-click on the exe and select the CPU Limiter
CPU Limiter
  • Set the “When CPU use is” to 98
  • Set the “Reduce by this many CPU cores” to 1
  • Below the “Reduce by this many CPU cores”, set the “For a period of” to 1
  • Click on the Add Rule button.
  • Finally click OK button and play the game.
CPU limit

Last Updated on 11 January, 2020 11:15 pm EST

Register Without Credit Card Required!

Add Comment

Click here to post a comment

Games

You cannot copy content of this page